RANCANG BANGUN ALAT PENGERING TIPE RAK SISTEM DOUBLE BLOWER

Rahbini Rahbini, Heryanto Heryanto, Basuki Rachmat, Erry Ika Rhofita

Sari


The drying process is done by most yam farmers in Indonesia by using conventional methods relying
on sunlight. However, it does have many flaws that depends only on sunlight and weather changes so
as to reduce the quality and interfere with the desired process. To improve the quality of the resulting
yam flour is required drier. In this study focuses on design of yam drier rack type with double blower.
The use of double blower on this instrument aims to establish a hot air flow patterns that can distribute
the temperature evenly across the drying chamber, so that the drying process can take place quickly.
Results of testing tools is done, the total energy requirement for drying chestnuts from the initial
moisture content of 84% to 4.91% for 4 hours at 20118,823 kJ with total LPG consumption required
for 0434 kg of LPG per hour and needs for 0109.


Teks Lengkap:

PDF (English)

Referensi


Bukle, K. A., (1985): Ilmu Pangan, Jakarta, UIPress.

Cengel, Yunus A., Boles, Michael A., (2002):

Thermodynamics-An Engineering Approach.

th Edition, New York, McGraw Hill.

Earle, R. L., (1982): Satuan Operasi dalam

Pengolahan Pangan, Bogor, Penerbit Sastra

Hudaya.

Fellows, P., (1990): Food Processing Technology

Principles and Practice, New York, Ellis

Horwood Press.

Heldman, Dennis., (1981): Food Process

Engineering, Westport, Connectiour, AVI

Publishing Company Inc.

Holman, J.P., (1995): Perpindahan Kalor, Jakarta,

Erlangga.

Juvinall, Robert C., (1967): Fundamental of

Machine Component Design, New York, John

Wiley & Sons.

Kartasapoetra, (1989): Teknologi Penanganan

Pasca Panen, Jakarta, Rineka Cipta.

Khatir, Rita., Ratna, dan Wardani., (2011):

Karakteristik Pengeringan Tepung Beras

dengan Menggunakan Alat Pengering Tipe Rak,

Jurnal Ilmiah Pendidikan Biologi, Biologi

Edukasi Volume 3, Nomor 2, Desember 2011,

pp:1-4.

Napitupulu, Farel H., dan Atmaja, Yuda Pratama,

(2011): Perancangan dan Pengujian Alat

Pengering Jagung dengan Tipe Cabinet Dryer

untuk Kapasitas 9 kg Per Siklus, Jurnal Dinamis

Volume II No. 8, pp: 32-43.

Nelwan L. O., Kamaruddin, A. H. Suhardiyanto dan

M.I. Alhamid., (1997): Performansi

Pengeringan Kakao dengan Alat Pengering Tipe

Efek Rumah Kaca, Seminar PERTETA di

Bandung tanggal 7-8 Juli 1997.

Napitupulu, Farel H., dan Tua, Putra Mora., (2012):

Perancangan dan Pengujian Alat Pengering

Kakao dengan Tipe Cabinet Dryer untuk

Kapasitas 7,5 kg Per Siklus, Jurnal Dinamis

Volume II No. 10, pp: 8-18.

Rachmawan, O., (2001): Pengeringan, Pendinginan,

dan Pengemasan Komoditas Pertanian,

BuletinAgroindustri Edisi 5, pp:12-23.

Setianto Wahyu, B., (1996): Analisa Kebutuhan

Energi Pada Proses Pengeringan Biji Kakao,

Majalah BPP Teknologi, No/LXIX/Mei/96.

pp:111-115.Singh, Paul., (2001) Introduction to Food

Enginering, New Jersey, Academic Press.

Sutrisno dan Budiraharjo, (2009): Rekayasa Mesin

Pengering Padi Bahan Bakar Sekam Kapasitas

T Terintegrasi untuk Meningkatkan Nilai

Ekonomi Penggilingan Padi Di Lahan Pasang

Surut Sumatra Selatan, Jurnal Pembangunan

Manusia, Edisi 6.

Taib, G., G. Said dan S. Wiraatmadja, (1987):

Operasi Pengeringan pada Pengolahan Hasil

Pertanian, Jakarta, Mediyatama Sarana Perkasa.

Tamba, Martawijaya., Rohanah, Ainu, dan Munir,

Achwir Putra., (2015): Rancang Bangun Alat

Pengering Kabinet untuk Ikan Pora-pora

(Mystacoleucus padangensis), Jurnal Rekayasa

Pangan Volume 3 No. 2, pp:254-260.

Thamrin, Ismail dan Kharisandi, Anton., (2011):

Rancang Bangun Alat Pengering Ubi KayuTipe

Rak dengan Memanfaatkan Energi Surya,

Prosiding Seminar Nasional AVoER ke-3,

Palembang, 26-27 Oktober 2011, pp: 49-54.

Walker, John R., (1981): Machining Fundamentals,

Illinois The Goodhearth


Refbacks

  • Saat ini tidak ada refbacks.